Announcement

Collapse
No announcement yet.

Was it the right decision?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gomi
    replied
    Because the installation package is no permanent solution i was looking for a provisional solution.
    So iv'e tested some things.

    My Environment is CentOS 7.2., Mariadb 5.5.50, Postgre, Apache 2.4.6, php 5.6.25, php 7.0.6 (7 not for fun - for typo3.8)
    It is completely illusory to use a new machine with nothing installed on it or a old machine... the trend is too fast.

    After i'm a litte bit lazy i'm searching for an 'good' environment.
    I tried ampps - but ampps is strongly overloaded and useless.

    Now we come back to the friends of apache so i used xampp 5.6.24.

    xampp - but i use only apache, perl and php.

    I installed scriptcase_linux_installer_x86_64_en_us_v8.1.049.r un and as before - i can't start the package - only errors.

    In xampp i installed ZendGuardLoader and opcache, customize the php.ini and create a vhost.
    I don't start mariadb from xampp!

    In the vhost i use - without changes - /opt/NetMake/v81/wwwroot !

    And horray ! it works - without any error message!.

    That shows us that the php evironment in the installation package is obviously flawed!

    This environment should be corrected as soon as possible ! - from NetMake!
    And it would be a honest way to remark that only the installer is 64bit - not apache and php!

    I describe this way only therefore, because it might be possible that someone else had such problems as I



    more relaxed.. with greetings from vienna Michael aka gomi


    Leave a comment:


  • gomi
    replied
    I'm going slightly mad.....

    After i can login - i want to register my license... but i think i change the permission to the httpd user = apache.
    Ok - i do this - fine...
    I log in - fine

    ===================================
    NO new lines in the error log - fine !
    I register the license without problem - i log out..
    ===================================

    I clear the httpd-logs and restart the server...
    I want to log in again
    I use the credentials and click login

    And.... ERROR ERR_EMPTY_RESPONSE

    Now the error log is full again...

    I restart the webserver

    http:sc.xx.xx/scriptcase I come to the login window

    At this time the error.log:
    [Tue Sep 13 21:20:11.859323 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP Warning: file_get_contents(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Tue Sep 13 21:20:11.859350 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP Stack trace:
    [Tue Sep 13 21:20:11.859363 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 21:20:11.859371 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Tue Sep 13 21:20:11.859401 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP Warning: file_get_contents(http://sc.gomi.at:80/scriptcase/test.php): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Tue Sep 13 21:20:11.859408 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP Stack trace:
    [Tue Sep 13 21:20:11.859414 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 21:20:11.859421 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Tue Sep 13 21:20:11.859476 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    [Tue Sep 13 21:20:11.859488 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP Stack trace:
    [Tue Sep 13 21:20:11.859495 2016] [:error] [pid 29387] [client 10.100.10.172:54933] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0


    I put in my credentials and klick login - no changes in error log - but empty response...

    Line 7 of index.php = $str_content = trim(file_get_contents($url . "test.php"));

    After hours and a refresh:

    [Tue Sep 13 22:54:18.152633 2016] [:error] [pid 20831] [client 10.100.10.172:65309] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 23:28:10.050805 2016] [:error] [pid 20831] [client 10.100.10.172:56263] PHP Fatal error: Allowed memory size of 1073741824 bytes exhausted (tried to allocate 3100166113 bytes) in Unknown on line 0
    [Wed Sep 14 00:01:10.255648 2016] [:error] [pid 5937] [client 10.100.10.172:62872] PHP Stack trace:
    [Wed Sep 14 00:01:10.255655 2016] [:error] [pid 5937] [client 10.100.10.172:62872] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Wed Sep 14 00:09:30.091523 2016] [:error] [pid 6019] [client 10.100.10.172:63295] PHP Fatal error: Allowed memory size of 1073741824 bytes exhausted (tried to allocate 3100166113 bytes) in Unknown on line 0
    [Wed Sep 14 00:09:30.091551 2016] [:error] [pid 6019] [client 10.100.10.172:63295] PHP Stack trace:
    [Wed Sep 14 00:09:30.091563 2016] [:error] [pid 6019] [client 10.100.10.172:63295] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/devel/iface/login.php:0
    [Wed Sep 14 01:47:44.693051 2016] [:error] [pid 17823] [client 10.100.10.172:51401] PHP Fatal error: Cannot run code from this file in conjunction with non encoded files in /opt/NetMake/v81/wwwroot/scriptcase/devel/lib/php/sc_unserialize.php on line 3




    test.php says "OK"
    diagnosis.php says "OK"
    ZendGuard Loader works fine






    Last edited by gomi; 09-14-2016, 01:37 AM.

    Leave a comment:


  • gomi
    replied
    Now i start the same installation /opt/Netmake/.... with a virtualhost apache64/php 5.6.25


    The error log is:
    [Tue Sep 13 20:04:59.578120 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Warning: file_get_contents(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Tue Sep 13 20:04:59.578141 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Stack trace:
    [Tue Sep 13 20:04:59.578151 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 20:04:59.578159 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Tue Sep 13 20:04:59.578189 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Warning: file_get_contents(http://sc.gomi.at:80/scriptcase/test.php): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Tue Sep 13 20:04:59.578208 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Stack trace:
    [Tue Sep 13 20:04:59.578216 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 20:04:59.578223 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Tue Sep 13 20:04:59.578254 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    [Tue Sep 13 20:04:59.578261 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Stack trace:
    [Tue Sep 13 20:04:59.578267 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    ~
    ~

    I can login!
    But i recieve a script case popup with the Information "warning"... Text WARNING... hmmm_

    I can import the "project Manage" project, compile it and run it.. .
    Every time after login i recieve the empty window "warning"...

    After import "project Manage" the error log=
    [Sun Sep 11 19:50:18.734444 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP Warning: file_get_contents(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Sun Sep 11 19:50:18.734471 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP Stack trace:
    [Sun Sep 11 19:50:18.734482 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Sun Sep 11 19:50:18.734490 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Sun Sep 11 19:50:18.734521 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP Warning: file_get_contents(http://sc.gomi.at:80/scriptcase/test.php): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Sun Sep 11 19:50:18.734528 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP Stack trace:
    [Sun Sep 11 19:50:18.734535 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Sun Sep 11 19:50:18.734541 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Sun Sep 11 19:50:18.734573 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    [Sun Sep 11 19:50:18.734579 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP Stack trace:
    [Sun Sep 11 19:50:18.734585 2016] [:error] [pid 13841] [client 10.100.10.172:55421] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 20:04:59.578120 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Warning: file_get_contents(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Tue Sep 13 20:04:59.578141 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Stack trace:
    [Tue Sep 13 20:04:59.578151 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 20:04:59.578159 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Tue Sep 13 20:04:59.578189 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Warning: file_get_contents(http://sc.gomi.at:80/scriptcase/test.php): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 7
    [Tue Sep 13 20:04:59.578208 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Stack trace:
    [Tue Sep 13 20:04:59.578216 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0
    [Tue Sep 13 20:04:59.578223 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 2. file_get_contents() /opt/NetMake/v81/wwwroot/scriptcase/index.php:7
    [Tue Sep 13 20:04:59.578254 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    [Tue Sep 13 20:04:59.578261 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP Stack trace:
    [Tue Sep 13 20:04:59.578267 2016] [:error] [pid 30981] [client 10.100.10.172:64140] PHP 1. {main}() /opt/NetMake/v81/wwwroot/scriptcase/index.php:0


    .....
    So, scriptcase team - what should i do?
    Install a new centos 6 server is out of the question...

    Leave a comment:


  • gomi
    replied
    Sorry... but we use since a long time CentOS 7. now CentOS Linux release 7.2.1511 (Core) (CentOS5 is history.... )
    Our servers are all the time up to date

    Usually no one can use a server with minimal install ONLY for Scriptcase 8.1...

    I tried it again to install scriptcase and the result is (again) this time:


    AH00526: Syntax error on line 426 of /opt/NetMake/v81/components/apache/conf/apachesc81.conf:
    FastCgiServer: "/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi" stat(/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi) failed: Value too large for defined data type



    (by the way... some rpm's in http://www.scriptcase.net/docs/en_us...-your-database are no longer available.. )




    Leave a comment:


  • Ronyan Alves
    replied
    About the content of error_log :
    "dynamic library" are the extension packages. So to enable the connection, you need to follow the steps from our documentation :
    http://www.scriptcase.net/docs/en_us...-your-database
    The message don't causes bad functionality of ScriptCase. Only the extensions will not be available before you do the steps from our documentation.
    Unfortunately the package changes according with the distro used. Because this , the user needs to activate the extension and install the libraries informed in the our documentation.

    None of these alerts prevents the ScriptCase operation.

    Please, update your Operational System to get the latest packages. The ScriptCase 8.1 works correctly on CentOS 6+ ( Possibly on the CentOS 5 works correctly too ).

    About the 32bit package :
    Yes, the scriptcase installer uses the 32bit apache and PHP, because the PHP 5.6 64bit is experimental, the only homologated for 64bit is the PHP 7.0 .

    But, On our tests , the installer works correctly on the Debian 6+(32 and 64) , Ubuntu 14+(32 and 64) , Centos 6+(32 and 64), OpenSuse 12+(32 and 64) and others distros.
    ( all linux cited were installed with a fresh installer and the minimum package for server )
    Last edited by Ronyan Alves; 09-13-2016, 02:33 PM.

    Leave a comment:


  • gomi
    replied
    Originally posted by robydago View Post
    I'm using SC 8.1 on Centos 7.2.
    I've been using the same machine starting with SC8.0 and Centos 7.0 and kept upgrading it.
    I don't remember any issue during setup.
    then you're the lucky one...

    I tested this on several machines.... and as i say no matter what os you use... error logs are filled...
    And the "64bit"-package... which is 32bit...

    Leave a comment:


  • robydago
    replied
    I'm using SC 8.1 on Centos 7.2.
    I've been using the same machine starting with SC8.0 and Centos 7.0 and kept upgrading it.
    I don't remember any issue during setup.

    Leave a comment:


  • aducom
    replied
    I have no experience with Centos / linux so I can't tell. We work with 10 devs without issues on a Windows hosting. If you install scriptcase you don't get wamp on your pc, but only apache working on a different port. You need to install the database separately. We use Uniform for our production environemnt. "And by the way... of course the windows installation produces also a ton of failures...." it's not our experience to be honest..
    But that doesn't solve your issue. We'll look into our own logfiles to see. Will get back here.

    Leave a comment:


  • alvagar
    replied
    I am not working with SC from some month ago because i am doing other thigs, BUT i am worried If Sc is failing, I need to update my projects to new version and i dont want have problems with erros!!!.

    Leave a comment:


  • gomi
    started a topic Was it the right decision?

    Was it the right decision?

    I am testing now scriptcase for two weeks.. Ah hold it... testing dempends only on the installation...
    And slowly i am really upset

    At first i install scriptcase on the pc - but i don't want wamp on my pc.. that's like gaming.

    So, no problem, as i read, i am able to install the software on a server...and by the way no "hosted" server

    At first i install the "compressed" Version.... ok i must rename the files... i must "test" which configuration (vhost) is working... etc etc..
    Then i recieve a lot of php fatal errors (php 5.6.25)
    Allowed memory exhausted, undefined variables, and a lot more... by the way... php works without any failure on this server...

    Ok - don't work let's take the package... ScriptCase V8.1 Installer for Linux64 bit
    Ok - Installation is done.. let's try to start it

    Oh...bad luck... that doesn't work... "...components/apache/cgi-bin/php.fcgi) failed: Value too large for defined data type"
    Let us examine this a bit...
    Ohhhh we have a 32-bit Apache in a 64bit Installation-Package.. that supposed to be funny?

    TESTED UNDER centos.5 ? ha? how old is this software?
    by the way - fcgi is outdated...


    Ok - lets try it on the nex server... we have a few...
    Wow... it works... slow.. but it works.. .let us take look in the error log:

    [Sat Sep 10 21:36:05.205896 2016] [ssl:warn] [pid 28376] AH01873: Init: Session Cache is not configured [hint: SSLSessionCache]
    [Sat Sep 10 21:36:05.207361 2016] [:notice] [pid 28378] FastCGI: process manager initialized (pid 28378)
    [Sat Sep 10 21:36:05.207727 2016] [:warn] [pid 28378] FastCGI: server "/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi" started (pid 28382)
    [Sat Sep 10 21:36:05.208027 2016] [mpm_prefork:notice] [pid 28376] AH00163: Apache/2.4.6 (Unix) OpenSSL/1.0.1f mod_fastcgi/mod_fastcgi-SNAP-0910052141 configured -- resuming normal operations
    [Sat Sep 10 21:36:05.208064 2016] [core:notice] [pid 28376] AH00094: Command line: '/opt/NetMake/v81/components/apache/apachesc81 -d /opt/NetMake/v81/components/apache'
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_pgsql.so' - /opt/NetMake/v81/components/apache/ext/pdo_pgsql.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/ibm_db2.so' - libdb2.so.1: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/oci8.so' - libclntsh.so.12.1: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/odbc.so' - libodbc.so.2: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_informix.so' - libifcli.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: Module 'ldap' already loaded in Unknown on line 0
    [Sat Sep 10 21:44:52.547790 2016] [:error] [pid 28384] [client 10.242.3.2:53790] FastCGI: server "/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi" stderr: PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    [Sun Sep 11 01:49:20.148262 2016] [:error] [pid 28381] [client 10.242.3.2:56326] FastCGI: server "/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi" stderr: PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    [Sun Sep 11 01:56:46.356186 2016] [:error] [pid 6011] [client 10.242.3.2:56810] FastCGI: server "/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi" stderr: PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    [Sun Sep 11 02:24:11.939784 2016] [:error] [pid 6040] [client 10.242.3.2:55758] FastCGI: server "/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi" stderr: PHP Notice: Undefined variable: msg in /opt/NetMake/v81/wwwroot/scriptcase/index.php on line 60
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_pgsql.so' - /opt/NetMake/v81/components/apache/ext/pdo_pgsql.so: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/ibm_db2.so' - libdb2.so.1: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/oci8.so' - libclntsh.so.12.1: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/odbc.so' - libodbc.so.2: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_informix.so' - libifcli.so: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: Module 'ldap' already loaded in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_pgsql.so' - /opt/NetMake/v81/components/apache/ext/pdo_pgsql.so: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/ibm_db2.so' - libdb2.so.1: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/oci8.so' - libclntsh.so.12.1: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/odbc.so' - libodbc.so.2: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_informix.so' - libifcli.so: cannot open shared object file: No such file or directory in <b>Unknown</b> on line <b>0</b><br />
    <br />
    <b>Warning</b>: Module 'ldap' already loaded in <b>Unknown</b> on line <b>0</b><br />

    wow - a fresh install and a ton of failures....

    Ahh... that doesn't matter - lets take a BRAND NEW SERVER.... we have a vew.... and again the error log

    [Sun Sep 11 15:41:02.817214 2016] [ssl:warn] [pid 9401] AH01873: Init: Session Cache is not configured [hint: SSLSessionCache]
    [Sun Sep 11 15:41:02.818337 2016] [:notice] [pid 9403] FastCGI: process manager initialized (pid 9403)
    [Sun Sep 11 15:41:02.818795 2016] [:warn] [pid 9403] FastCGI: server "/opt/NetMake/v81/components/apache/cgi-bin/php.fcgi" started (pid 9408)
    [Sun Sep 11 15:41:02.818922 2016] [mpm_prefork:notice] [pid 9401] AH00163: Apache/2.4.6 (Unix) OpenSSL/1.0.1f mod_fastcgi/mod_fastcgi-SNAP-0910052141 configured -- resuming normal operations
    [Sun Sep 11 15:41:02.818948 2016] [core:notice] [pid 9401] AH00094: Command line: '/opt/NetMake/v81/components/apache/apachesc81 -d /opt/NetMake/v81/components/apache'
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_pgsql.so' - /opt/NetMake/v81/components/apache/ext/pdo_pgsql.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/ibm_db2.so' - libdb2.so.1: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/oci8.so' - libclntsh.so.12.1: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/odbc.so' - libodbc.so.2: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: PHP Startup: Unable to load dynamic library '/opt/NetMake/v81/components/apache/ext/pdo_informix.so' - libifcli.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning: Module 'ldap' already loaded in Unknown on line 0
    ~

    And by the way... of course the windows installation produces also a ton of failures....

    And they sell this software without support?
    It's a effrontery...
    From the support you recieve a linke to the apache docus - thanks but after 20 years i don't need it.

    The software is not cheap..
    And i expect at least a error-free installation. ..

    The forum is not better (after registering you recieve the message "registration_gregister registeremail" - is that funny?
    While i write this i recieve an invalid server-response...

    I think it was the wrong decision to buy this expensive software..



    and... how old is the docu??????


    Addendum:
    Because it's a funny sunday i install the 32bit automatic installation files... Wow - what a surprise the files are equal (except the installation routine) - more surprise the OUTDATED fcgi started.. but of course with failures... so status is - startet but not working..

    Next try "No input file specified" .... same installation file, same procedure... thats ridicolous


    Had i known this earlier i would not have bought the software. It's not the business of the customer to repair this....
    Last edited by gomi; 09-11-2016, 03:01 PM.
Working...
X